Carbon Nanotube Fibers with Excellent Mechanical and Electrical Properties by Structural Realigning and Densification

Floating catalysis chemical vapor deposition (FCCVD) direct spinning process is an attractive method for fabrication of carbon nanotube fibers (CNTFs). However, the intrinsic structural defects, such as entanglement of the constituent carbon nanotubes (CNTs) and inter-tube gaps within the FCCVD CNTFs, hinder the enhancement of mechanical/electrical properties and the realization of practical applications of CNTFs. Therefore, achieving a comprehensive reassembly of CNTFs with both high alignment and dense packing is particularly crucial. Herein, an efficient reinforcing strategy for FCCVD CNTFs was developed, involving chlorosulfonic acid-assisted wet stretching for CNT realigning and mechanical rolling for densification. To reveal the intrinsic relationship between the microstructure and the mechanical/electrical properties of CNTFs, the microstructure evolution of the CNTFs was characterized by cross-sectional scanning electron microscopy (SEM), wide angle X-ray scattering (WAXS), polarized Raman spectroscopy and Brunauer–Emmett–Teller (BET) analysis. The results demonstrate that this strategy can improve the CNT alignment and eliminate the inter-tube voids in the CNTFs, which will lead to the decrease of mean distance between CNTs and increase of inter-tube contact area, resulting in the enhanced inter-tube van der Waals interactions. These microstructural evolutions are beneficial to the load transfer and electron transport between CNTs, and are the main cause of the significant enhancement of mechanical and electrical properties of the CNTFs. Specifically, the tensile strength, elastic modulus and electrical conductivity of the high-performance CNTFs are 7.67 GPa, 230 GPa and 4.36 × 10 6 S/m, respectively. It paves the way for further applications of CNTFs in high-end functional composites.